Rear Shelf Project Part 3

Rear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildMade a trip to Hobby Lobby to pick up material to wrap up the rear shelf project. I had planned to use the same vinyl that I used on the trunk liner project, but found something else that I thought would work and look a lot better. Best way to describe it is like a very think, heavy duty felt. With material and staple gun in hand, I began to stretch, fit and staple the material to the rear shelf. Very happy with the end result, it fits perfectly, at just the angle that I wanted it to. All in all, a very easy project with minimal costs. The plywood that I used was scrap that I had laying around, I have right at 7 dollars in material and a total of about 2 hours time in the project. If youre wanting a rear speaker shelf and dont want to fork out 60 dollars for some crappy aftermarket piece, this project is easy enough for just about anybody with a power saw, jig saw and a couple hours to spare.

Rear Shelf Project Part 1
Rear Shelf Project Part 2
Rear Shelf Project Part 3

Rear Shelf Project Part 2

Rear Shelf BuildRear Shelf BuildFinished sanding all of the edges, getting everything symmetrical. Applied 2 layers of felt to give it a little padding. I think Im going to use the same vinyl that I used for the trunk liner. Will hopefully have everything wrapped up this weekend.

Rear Shelf Project Part 1
Rear Shelf Project Part 2
Rear Shelf Project Part 3

Rear Shelf Project Part 1

Rear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildSo I decided to start on the rear shelf project today. Id priced some online, but just cant justify paying 60 dollars for a flimsy piece of material when I can build something a bit more beefy for a lot less. I wanted something strong that I may end up mounting speakers beneath, but still light enough that it can be easily removed. So I decided to make my own rear shelf out of 1/2 plywood that will be covered either in carpet to match the interior or some type of industrial material that will blend well. Remember to measure twice and cut once. Got this one on the first try, test fitted perfectly and it gives the look that Im going for with the stability of heavier material. I glued and screwed a support that will keep the shelf from bowing or sagging over time. All thats left to do is find the right material to cover it. That search begins tomorrow. And the best part, other than my time, it hasnt cost anythingyet!

Rear Shelf Project Part 1
Rear Shelf Project Part 2
Rear Shelf Project Part 3