Archives for May 2017

Bamboo Parcel Tray

Bamboo Parcel TrayBamboo Parcel TrayGot the new bamboo parcel tray that I ordered from cip1.com. Happy with the quality of the build, came with necessary hardware that Ill have to figure out. Two screws and pretty self explanatory, but a large black rubber band that Im not too sure about. Did a quick dry fit before leaving for work, love the look.

New Horn Ring

New Horn RingNew Horn RingNew Horn RingNew Horn RingGot my new horn ring, contact kit and center cap from M T Manufacturing in the mail today. Compared to the original horn bar and center cap, Im very pleased with the quality of the repo parts. I was going to order from AirHeads, but they didnt have the horn rings in stock and hadnt for a long time. Since Ive ordered form M T before and have been pleased with the products Ive ordered from them, I went with them on the horn ring and center cap. The horn ring is period correct to my Beetle and Im really happy with the look. With the horn bar, it just looked like something was missing. Install took about 10 minutes, everything fit as it should, horn works as it should. Ill call this one a success! Ill put the horn bar that I removed in the classifieds.

3rd Brake Light Follow Up

New 3rd Brake LightNew 3rd Brake LightNew 3rd Brake LightNew Euro TagNew Euro TagFinished installing the 3rd brake light today. Turned out exactly the way that I wanted it to. Its new, but still has a hint of a vintage look. And boy is it bright, itll certainly get peoples attention at night. I also installed my European tag that I ordered from customeuropeanplates.com. 68 for the year, KY for the state, then E272 which is my historical plate number. It also came with a free mounting bracket. Very pleased with the quality.

3rd Brake Light Project

3rd Tail Light Project3rd Tail Light Project3rd Tail Light Project3rd Tail Light Project3rd Tail Light ProjectSo Ive started on another project that may appeal to some and may be repulsive to others, but hey, its my Beetle and Ill do what I want. lol Anyhow, I wanted to add a 3rd brake light but keep the vintage look without paying the price for a vintage brake light. So I turned to Speedway Motors to see if they had a red lens lamp that would match the amber fog lights that I installed a couple of months ago. Unfortunately, they only offered amber and clear. As a matter of fact, finding a red lens fog light is pretty much impossible and since I wanted the style to match my amber fog lights, I ordered the clear lamp from Speedway Motors, ordered a bumper bracket to mount it on and set out to find a way to make it red. While waiting for the goodies to arrive, I went ahead and did the wiring for the new lamp. That took all of 5 minutes. I thought about replacing the bulb with a red bulb, but finding a red bulb that would work was also impossible. Then I thought about making a gel that I could put behind the lens. Again, these lamps from Speedway Motors are really nice, built to last and of course, theyre sealed. So that blew out the gel idea. While researching, I came across this product by VHT specifically for clear lenses. Its used to make them red or it can be used to freshen up your already red lenses. It stated that itd work on glass, so I figured Id give it a try. If it didnt work, itd be easy enough to remove and Id be back to square one. My bracket wont be here until Friday, but the lamp arrived today. So I took it apart, prepped the lens and gave the VHT product a try. Id already tested it on a piece of plexi-glass that I had laying around and it worked wonderfully, but I still wasnt sure how itd work on a glass lens. I gave the lens a total of 3 coats, waiting 15 minutes in between each coat. This stuff dries very fast, applies very smoothly and is very easy to work with. After 3 coats and about 8 hours of drying time, I put the lamp back together and tested it with the wiring that Id already installed. I think it looks great, now I just have to wait for the bracket mount to arrive.

Rear Shelf Project Part 3

Rear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildMade a trip to Hobby Lobby to pick up material to wrap up the rear shelf project. I had planned to use the same vinyl that I used on the trunk liner project, but found something else that I thought would work and look a lot better. Best way to describe it is like a very think, heavy duty felt. With material and staple gun in hand, I began to stretch, fit and staple the material to the rear shelf. Very happy with the end result, it fits perfectly, at just the angle that I wanted it to. All in all, a very easy project with minimal costs. The plywood that I used was scrap that I had laying around, I have right at 7 dollars in material and a total of about 2 hours time in the project. If youre wanting a rear speaker shelf and dont want to fork out 60 dollars for some crappy aftermarket piece, this project is easy enough for just about anybody with a power saw, jig saw and a couple hours to spare.

Rear Shelf Project Part 1
Rear Shelf Project Part 2
Rear Shelf Project Part 3

Rear Shelf Project Part 2

Rear Shelf BuildRear Shelf BuildFinished sanding all of the edges, getting everything symmetrical. Applied 2 layers of felt to give it a little padding. I think Im going to use the same vinyl that I used for the trunk liner. Will hopefully have everything wrapped up this weekend.

Rear Shelf Project Part 1
Rear Shelf Project Part 2
Rear Shelf Project Part 3

Rear Shelf Project Part 1

Rear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildRear Shelf BuildSo I decided to start on the rear shelf project today. Id priced some online, but just cant justify paying 60 dollars for a flimsy piece of material when I can build something a bit more beefy for a lot less. I wanted something strong that I may end up mounting speakers beneath, but still light enough that it can be easily removed. So I decided to make my own rear shelf out of 1/2 plywood that will be covered either in carpet to match the interior or some type of industrial material that will blend well. Remember to measure twice and cut once. Got this one on the first try, test fitted perfectly and it gives the look that Im going for with the stability of heavier material. I glued and screwed a support that will keep the shelf from bowing or sagging over time. All thats left to do is find the right material to cover it. That search begins tomorrow. And the best part, other than my time, it hasnt cost anythingyet!

Rear Shelf Project Part 1
Rear Shelf Project Part 2
Rear Shelf Project Part 3